Melbourne’s Epoxy Flooring Specialists
Epoxy Flooring Melbourne
Professional epoxy flooring Melbourne homes and businesses can rely on — installed to resist oil, chemicals, hot tyres and heavy traffic across garages, homes and commercial spaces. Built to last 10 to 20 years, not peel within one.
📞 Call 0498 200 654Get a Free Quote
✅ Free On-Site Quotes | ✅ Fully Licensed & Insured | ✅ 100% Solids & Flake Systems | ✅ 15+ Years Experience
A Concrete Floor That Actually Lasts
If your garage slab is stained, dusty or flaking, a quality epoxy flooring system in Melbourne turns it into a seamless, showroom-grade surface that shrugs off oil, chemicals and hot tyres. As experienced coating specialists, we install professional-grade epoxy for garages, homes, workshops, retail spaces and warehouses across Melbourne — with the proper concrete preparation that decides whether a floor lasts two decades or lifts within a year. Cheap hardware-store kits almost always fail from poor prep and moisture. We do it once, and we do it right. If you’re searching for a garage floor epoxy installer or comparing epoxy floor coating installers around Melbourne, the real difference between them usually comes down to how much prep goes on before a drop of epoxy is ever poured.
Epoxy Flooring Systems We Install
Different spaces need different systems. We help you choose the right one for how the floor is actually used.
Garage Floor Coatings
The most popular choice. A glossy, chemical-resistant finish that resists oil, fuel and tyre marks and transforms a dusty slab into a clean, hard-wearing surface.
Flake (Speckled) Systems
Decorative vinyl-flake finishes that hide dirt, add slip resistance and give a durable, textured look popular in homes and garages.
Metallic Epoxy
High-end, swirled metallic finishes for showrooms, retail spaces and feature floors where the look matters as much as the durability.
Commercial & Industrial
100% solids, high-build systems for warehouses, factories and workshops — engineered for forklift traffic, impact and chemical resistance.
Anti-Slip Coatings
Textured, slip-resistant additives achieving P3 to P5 ratings for kitchens, wet areas and workplaces where safety and compliance matter.
Clear Sealers & Topcoats
Protective clear and polyurethane topcoats that seal concrete, add UV stability and extend the life of the floor underneath.
Our Epoxy Flooring Process
A lasting epoxy floor is built on preparation. Here is how we approach every job:
- Free on-site assessment & quote — we check the slab condition, moisture and use, then quote an itemised system within 24 to 48 hours.
- Diamond grinding & prep — we mechanically grind the concrete to open the surface for a proper mechanical bond. This step is what DIY kits skip.
- Crack & spall repair — cracks, pitting and damaged areas are filled and levelled before coating.
- Moisture check & primer — we test for moisture and apply the right primer or moisture barrier so the system does not delaminate later.
- Base coat & flake or colour — the epoxy base is applied, with flake or colour broadcast as chosen.
- Clear topcoat & cure — a protective topcoat seals it all. Light foot traffic returns in 12 to 24 hours; vehicles after 48 to 72 hours.
What Epoxy Flooring Costs in Melbourne
Every slab is different, so treat these as 2026 planning ranges rather than a quote. Final cost depends on floor size, concrete condition, the system chosen and how much preparation is needed — for a full breakdown of what drives the price, see our epoxy flooring cost guide.
| Job | Typical 2026 range |
|---|---|
| Basic roll-on epoxy coating, per m² | $45–$65 |
| Flake / speckle epoxy system, per m² | $65–$90 |
| Metallic / decorative epoxy, per m² | $90–$120 |
| Commercial & industrial, per m² | $80–$150+ |
| Single garage (18–20 m²) | $1,600–$3,500 |
| Double garage (36–40 m²) | $2,800–$6,000 |
Poor or damaged concrete adds preparation time, and switching from a dark to a light finish can need an extra coat. A properly installed epoxy floor lasts 10 to 20 years, compared with basic concrete paint that often peels within one or two.
Why Choose EQ Painting Solutions
Whether you found us searching for an epoxy floor installer, garage epoxy floor installers, or epoxy garage floor installers, here’s what actually separates a floor that lasts two decades from one that lifts within two:
- Proper concrete preparation — diamond grinding and moisture testing on every job, not a quick roll-over.
- Commercial-grade products — 100% solids and flake systems built for Australian conditions, not watered-down kits.
- Licensed & insured — full public liability cover and a workmanship warranty.
- Minimal disruption — staged works and clear timelines for homes and active business sites.
- 15+ years across Melbourne — honest advice on the right system for your space and budget.
Epoxy Flooring Across Melbourne
Search “epoxy floors Melbourne” and you’ll land on us — we install epoxy floors for homes and businesses across Melbourne and surrounding suburbs, including Richmond, St Kilda, Port Melbourne, South Melbourne, Hawthorn, South Yarra, Toorak, Brighton, Brunswick, Prahran, Glen Iris, Malvern, Mount Waverley and beyond. If you are comparing options, our guide to getting accurate quotes in Melbourne is a useful read.
Frequently Asked Questions
As a 2026 guide, basic residential epoxy runs about $30 to $50 per square metre, and decorative flake or metallic systems $60 to $120. A single garage is typically $1,800 to $3,000 and a double garage $2,500 to $4,000. Concrete condition, floor size and finish all affect the final price.
A professionally installed epoxy floor typically lasts 10 to 20 years or more with minimal maintenance. Basic concrete paint, by comparison, often peels or wears within one to two years.
It does not have to be. We add anti-slip additives that achieve P3 to P5 slip ratings for garages, wet areas and workplaces, so the floor stays safe underfoot.
Light foot traffic is usually fine after 12 to 24 hours, and vehicles can return after 48 to 72 hours. Exact cure times depend on the system and the weather.
Yes. For shops, workshops and warehouses we stage the work and can arrange after-hours or phased access so your operations keep running with minimal disruption.
Professional installation is far more reliable. Hardware-store kits often fail from poor surface preparation and moisture within a year. We diamond-grind the slab, test for moisture and use commercial-grade 100% solids products.
Yes. Proper preparation is essential for adhesion. We diamond-grind the concrete, repair cracks and pitting, and check moisture before any coating goes down.
Epoxy suits garages, basements, workshops, retail spaces, cafes, commercial kitchens and warehouses. We recommend the right system based on how the floor will be used.
Ready for a Floor That Lasts Decades?
Get a free, no-obligation on-site quote from Melbourne’s epoxy flooring specialists. We will assess your slab, recommend the right system and put an itemised price in writing.